¥优德88中文版-优德88手机中文版-w88top优德官网中文版-入口

当前位置: 主页 > 电子技术 >

基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图

时间:2018-02-04 18:00来源:海猎人
MC33905是第二代系统基本芯片(SBC),包括有多中特性和增强的模块设计,能作为MCU和其它集成电路如传感器,CAN收发器的先进的功率管理单元. MC33905内置了高速CAN接口(ISO11898-2 和-5),以及本地和总线故障诊断,保护以及故障安全操作模式等.本文介绍了MC33905主要特性,方框图,以及简化应用框图和典型应用电路, MC33905评估板EVB主要特性, 电路图和材料清单(BOM).

The 33904/5 is the second generation family of System Basis Chips which combine several features and enhance present module designs. The device works as an advanced power management unit for the MCU and additional integrated circuits such as sensors, CAN transceivers. It has a built-in enhanced high speed CAN interface (ISO11898-2 and -5), with local and bus failure diagnostics, protection, and fail safe operation mode. The SBC may include one or two LIN 2.1 interfaces with LIN output pin switches. It includes up to 4 wake-up input pins than can also be configured as output drivers for flexibility.

This device implements multiple Low Power modes, with very low-current consumption. In addition, the device is part of a family concept where pin compatibility, among the various devices with and without LIN interfaces, add versatility to module design.

The 33904/5 also implements an innovative and advanced fail-safe state machine and concept solution.

MC33904/5主要特性:

•Protected 5.0V or 3.3V regulators for MCU (part number selectable) and additional ICs (SPI configurable) with optional external PNP usage to increase current capability for MCU.

•Fully-protected embedded 5.0 V regulator for the CAN driver

•Extremely low quiescent current in low power modes

•Multiple under-voltage detections to address various MCU specifications and system operation modes (i.e. cranking)

•Multiple wake-up sources in low power modes: CAN or LIN bus, I/O transition, automatic timer, SPI message, and VDD over-current detection.

•Voltage, current and temperature protection with enhanced diagnostics that can be monitored by system via MUX output

•ISO11898-5 high speed CAN interface compatibility for baud rates of 40 kb/s to 1.0 Mb/s. LIN 2.1 and J2602 LIN interface compatibility

•Pb-free packaging designated by suffix code EK 

基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图1.MC33905D内部方框图 
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图2.MC33905S内部方框图 
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图3.MC33904A内部方框图 
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图4.MC33905D简化应用方框图 
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图5.MC33905S简化应用方框图 
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图6.MC33905A简化应用方框图 
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图7.MC33905D典型应用电路图 
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图8.MC33905S典型应用电路图 
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图9.MC33905A典型应用电路图 

MC33905评估板EVB

This EVB includes two I/O test points that can be configured to be pulled up to VSup or pulled down to GND through a resistor and indicator LED. These are easily configured via jumper settings. The SBC can also be exercised in debug mode (watchdog re-fresh/monitoring not needed) by simply populating a jumper. Separating the input supply voltage to VSup1 and VSup2 is also made simple with a jumper configuration. Specified resistor pull-downs can be implemented on DBG and MUX pins via simple jumper configurations. The status of I/O0, I/O1, VAUX, 5V_CAN, SAFE and VDD can be visually monitored via on-board LEDs. The CAN and LIN Bus signals are provided through terminal block connectors.

An isolated terminal block connector is implemented to provide power to the evaluation board with an external DC power supply.

The evaluation board is operated through the graphical user interface paired up with the SPI dongle board (KITUSBSPIDGLEVME) through the 2x8 pin ribbon cable. Additionally, for added flexibility, the user can implement a custom board with a microcontroller to talk to the SBC via the 16 pin header.

MC33905评估板EVB主要特性:

•Nominal operating supply voltage range of 5.5V to 27V

•Individually routed power supply inputs for VSup1 and VSup2

•5.0 V regulator for MCU with external PNP ballast transistor to increase current capability.

•Multiple CAN Bus termination options supported via socket

•Two high/low side I/Os (SPI configurable) accessible through test points.

•Status of I/O0 and I/O1 indicated by LED (dependent on jumper configuration)

•Debug Mode/watchdog configuration via jumper settings

•MUX output voltage accessible through test point and external resistor selectable through jumper

•3.3 V or 5.0 V output voltage test point VAUX (SPI configurable) 

•I_WAKE_I test point to enable a FET and load VDD with current to wake up the SBC.

•LIN1_T and LIN2_T test points to monitor I/O voltages (SPI configurable)

•I/O0, I/O1, VAUX, 5V_CAN, SAFE and VDD status indicated by LED

•100mil 2x8-pin standard header connector for SPI communication

•100mil 16-pin standard header connector for custom MCU board connection

基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图10.MC33905评估板KIT33905D5EKEVBE外形图
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人 
图11.评估板KIT33905D5EKEVBE建立配置方框图
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
图12.评估板KIT33905D5EKEVBE电路图

评估板KIT33905D5EKEVBE材料清单(BOM):
基于MC33905设计MCU功率管理方案,特性,简化应用方框图 典型应用电路图 - 海猎网-海猎人
------分隔线----------------------------
相关文章推荐:
1nm晶体管诞生时间

      美国劳伦斯伯克力国家实验室(以下简称伯克力实验室)教授阿里-加维(Ali Javey)领导的一个研究小组日前利用... [优德88中文版]


NovaThor U8500芯片参数,性能,详解,特点,详

      NovaThor U8500是由意法爱立信于2011年推出的一款智能手机芯片,意法爱立信公司是意法半导体与爱立信各出5... [优德88中文版]


基于MC33905设计MCU功率管理方案,特性,简化

      MC33905是第二代系统基本芯片(SBC),包括有多中特性和增强的模块设计,能作为MCU和其它集成电路如传感器,CAN... [优德88中文版]


LM358双运算放大器,附电压,参数,内部结构原

      LM358是双运算放大器。内部包括有两个独立的、高增益、内部频率补偿的运算放大器,适合于电源电压范围很宽... [优德88中文版]


lm358封装类型引脚图,lm358特性参数介绍说

      本文为您介绍lm358引脚图、各个引脚作用使用说明,lm358封装类型及lm358参数具体内容,优德88中文版看下文: lm358... [优德88中文版]


发表评论
请自觉遵守互联网相关的政策法规,严禁发布色情、暴力、反动的言论。
评价:
表情:
用户名: 验证码:点击我更换图片